Table 27 - Interface Status -Dvi/Hdmi Fields - Arris VMS1100 Installation And Operation Manual

Diagnostics
FIELD
Mode
Color Space
Device Connected
Video Xmission
HDCP Enabled
Output Format
Aspect Ratio
EDID DATA
VMS1100 Hybrid QAM/IP Video Media Server • Installation and Operation Manual
365-095-25654 x.1
Table 27 – Interface Status -DVI/HDMI Fields (Page 1 of 2)
DESCRIPTION
Indicates the connector mode: DVI or HDMI
Indicates the color space used over the HDMI connection:
YCC or RGB
• Indicates whether a device is connected to the HDMI
Video transmission — Indicates whether the VMS1100 is
transmitting video over the HDMI port
Indicates whether the VMS1100 is using HDCP to encrypt
video transmitted over the HDMI link — Yes or No. If the
Video Xmission status is Not Active, the HDCP Enabled
status is No
Indicates the timing format of the video sent through HDMI:
• 1920 x 1080p — 1920 pixels wide by 1080 pixels
• 1920 x 1080i — 1920 pixels wide by 1080 pixels high,
• 1280 x 720p — 1280 pixels wide by 720 pixels high,
• 720 x 480p — 720 pixels wide by 480 pixels high,
• 720 x 480i — 720 pixels wide by 480 pixels high,
• 640 x 480p — 640 pixels wide by 480 pixels high,
Indicates the aspect ratio of the video sent through HDMI:
4:3 or 16:9.
Indicates the video timing formats that were read from the
Extended Display Identification Data (EDID) register for the
connected device. In particular, the detailed timing description
blocks. The list displays a selection of common formats that
the TV or repeater supports that have been read by the
Product.
If the Product cannot read any formats, EDID Data is blank.
An asterisk (*) after the aspect ratio means the Product
supports the format.
This document is uncontrolled pending incorporation in an ARRIS CMS
port: Yes or No.
high, progressive
interlaced
progressive
progressive
interlaced
progressive
72