Clear The Hard Drive; Figure 8 - Basic User Interface (Bui) Main Menu - Arris VMS1100 Installation And Operation Manual

Installation
Connect the stereo audio cable to the audio l and r connectors on the VMS1100 series and the audio left and
right connectors on the TV. If the equipment supports it, use the optical S/PDIF or coaxial digital RCA output
instead of the audio l and r outputs. In most cases, these outputs offer better audio quality, including support
for 5.1 Surround Sound. The cabling diagrams show sample audio/video (A/V) connections to an audio
receiver, where the receiver functions as an A/V router.
When connecting to an audio receiver, reference its installation instructions for directions on connecting to
baseband and digital (S/PDIF) audio ports.
Note: The VCR and TV receive their A/V signals from the currently selected input device on the audio
receiver. This is important when the subscriber has another A/V device such as a DVD player, a secondary
VCR, a CD player, or other electronic component. We recommend connecting the TV to the monitor output
so onscreen menus for the receiver can be displayed. (In many cases, the receivers themselves have
interactive onscreen menus.)

Clear the Hard Drive

If you are installing a previously used VMS1100, delete all recorded programs from the hard drive before
completing the installation at a new subscriber location. This prevents your new subscriber from viewing
programming they may not have purchased or may not want to see.
Do the following to clear the VMS1100 hard drive:
1. Connect the AC power on the VMS1100.
2. Press the
key on the IR remote control immediately after the VMS1100 front panel 8888 indicators dim.
D
The BUI main menu displays.
Note: There may be a one minute delay while the application boots up before the BUI menu displays.
3. Select 01 Diagnostics from the BUI main menu to start the onscreen diagnostics. See
Basic User Interface (BUI)
4. Within five seconds, press
Note: On some remote controls, the
ο If successful, the hard drive is cleared and
reset the terminal and turn it OFF to complete the clearing process.
ο
Clr
If is not displayed, repeat step 4.
VMS1100 Hybrid QAM/IP Video Media Server • Installation and Operation Manual
365-095-25654 x.1
Figure 8 – Basic User Interface (BUI) Main Menu
for more information.
three times, and
DVR
key may be labeled as
DVR
Clr
This document is uncontrolled pending incorporation in an ARRIS CMS
on the IR remote control.
FiOS TV
.
list
is displayed on the front panel. Press any other key to
Accessing the
15