Optimizing The High-Definition Settings; Figure 30 - Basic User Interface (Bui) Main Menu - Arris VMS1100 Installation And Operation Manual

Installation
Note: The MotoPLYR diagnostics are not available once the VMS1100 is booted up. Please refer to the
MotoPLYR Client Installation and Operation Manual for more information.

Optimizing the High-Definition Settings

This section describes how to optimize the SD and HD video settings and closed captioning based on
subscriber preferences.
Do the following before changing the output settings:
1. Connect the VMS1100 to the other home entertainment devices.
2. Plug the power cord on the VMS110 into an electrical wall outlet.
3. Check that the VMS1100 has successfully completed the auto-provisioning process and has connectivity
to the IPC1100 set-top(s) through the home network.
4. Turn ON the TV.
Note: For an HDMI connection, check that the TV is ON and that HDMI is selected as the input before
adjusting the settings. ARRIS recommends using certified Standard (or "category 1") HDMI cables for 1080i
or 720p resolutions. A certified high-speed (or "category 2") HDMI cable is recommended for resolutions of
1080p.
There are two methods for accessing the User Setting menu to optimize the output settings:
•
Use the BUI menu. See
•
Manually configure the user settings (see below).
To optimize the user settings:
1. Power OFF the VMS1100 and immediately press the Select key and then press the Menu key on the
remote control.
If the TV is ON, the onscreen menu will display the user settings that you can configure (see Figure 31).
VMS1100 Hybrid QAM/IP Video Media Server • Installation and Operation Manual
365-095-25654 x.1
Figure 30 – Basic User Interface (BUI) Main Menu
Accessing the Basic User Interface (BUI)
This document is uncontrolled pending incorporation in an ARRIS CMS
for more information.
36