Table 15 - Unit Address Fields; Table 16 - Separable Security Fields - Arris VMS1100 Installation And Operation Manual

Diagnostics
The front panel displays the unit address of the device when the Address/Security screen is displayed, if the
device supports a unit address. See the following examples:
FIELD
CableCARD Inserted
Unit Address
Host Serial Number
4 MAC Addresses Installed
FIELD
CARD Interface
CableCARD ID
Host ID
Data ID
VMS1100 Hybrid QAM/IP Video Media Server • Installation and Operation Manual
365-095-25654 x.1
Table 15 – Unit Address Fields (Page 1 of 2)
DESCRIPTION
YES — CableCARD is inserted
NO — CableCARD is not inserted
A unique decimal number that indicates the unit address
of the CableCARD.
Displayed on the Unit Address Diagnostic screen.
The MAC addresses are stored in protected flash and displayed in
hexadecimal.
Table 16 – Separable Security Fields (Page 2 of 2)
DESCRIPTION
CableCARD Interface is a status indication of the interface between
the VMS and CableCARD. It will indicate 'Good' if no errors were
detected, 'Error' if there is a problem detected with establishing the
CableCARD interface, or 'Unsupported CARD' if the inserted
CableCARD is not an M-CARD.
The unique identifier provided by the CableCARD.
The unique identifier in the VMS Device Certificate.
A value generated by the CableCARD for the Pairing report.
This document is uncontrolled pending incorporation in an ARRIS CMS
52