Connecting To The Ont With Embedded Moca; Figure 10 - Connecting To The Ont1000M - Arris VMS1100 Installation And Operation Manual

Installation

Connecting to the ONT with Embedded MoCA

If necessary, connect to the ONT to the home coaxial network. This example shows connecting the ARRIS
ONT1000M with embedded Multimedia over Coax Alliance (MoCA) technology.
Make sure the coaxial cabling on the customer premises is not connected to any
digital network or satellite dish.
Determine how to route the coaxial and Ethernet cables from the ONT into the home. You may need to move
an existing cable drop from its present location to where the ONT is mounted.
To connect to the ARRIS ONT1000M:
•
Open the door.
•
Connect the customer's premises coaxial cable wiring to the CABLE OUT port.
•
If necessary, route the coaxial cables into the house.
•
Replace the lower half enclosure and secure the ONT1000M.
VMS1100 Hybrid QAM/IP Video Media Server • Installation and Operation Manual
365-095-25654 x.1
Figure 10 – Connecting to the ONT1000M
This document is uncontrolled pending incorporation in an ARRIS CMS
17