Seat Leon 2012 Owner's Manual page 74

72 Cockpit
Resetting a memory
– Select the memory where you wish to erase the values.
– Hold down button on the windscreen wiper lever or the
A
on the multifunction* steering wheel for at least two seconds.
The journey memory 1 collects the travel and consumption data from the
moment the ignition is switched on until it is switched off. If the journey is
continued within two hours of switching off the ignition, the new values will
be added to the existing trip recorder memory. The memory will automati-
cally be deleted if the journey is interrupted for more than two hours.
The total journey memory 2 collects the journey data for any number of indi-
vidual journeys (even if the ignition is switched off for longer than two
hours) up to a total of 19 hours and 59 minutes travel time or 1999 km dis-
tance travelled. The memory will automatically be deleted if one of the
named values is reached.
Memory indications
The following data can be viewed on the multifunction display using the
⇒ f ig. 43 ⇒ p age 68 on the windscreen wiper lever or by
rocker switch
B
⇒ f ig. 44
pressing button or
 
Personal selection of display
The driver can establish which displays are shown on the instrument panel
display as required:
● Select the submenu
Multifunction Display Data
menu ⇒ p age 73.
● The displays can be activated or deactivated individually by marking the
required option and pressing the
or the multifunction steering wheel*.
in and
Duration h min
The display shows the amount of time which has elapsed since the ignition
was switched on.
button
OK
on the multifunction steering wheel*.
from the
Configuration
button on the windscreen wiper lever
OK
The maximum display value in both memories is 19 hours and 59 minutes.
The memory will automatically be deleted once this value has been
reached.
in or
Current fuel consumption l/100 km
The display will show the current fuel consumption in litres/100 km whilst
the vehicle is in motion or in litres/hour when the vehicle is in a stationary
position with the engine running.
Using this display you can see how your driving style affects fuel consump-
tion ⇒ p age 157.
Average consumption in l/100 km
The average fuel consumption will be shown after a distance of approxi-
mately 100 metres has been travelled. Until then dashes will appear in the
display. The display will be updated every five seconds while the vehicle is
in motion. The amount of fuel used will not be shown.
in
Distance travelled km
The display shows the distance travelled since the ignition was switched on.
The maximum display value in both memories is 1999 km. The memory will
automatically be deleted once this value has been reached.
in
Average speed km/h
The average speed will be shown after a distance of approximately 100 me-
tres has been travelled. Until then dashes will appear in the display. The
display will be updated every five seconds while the vehicle is in motion.
Speed warning at --- km/h
This function may help you to keep within the speed limits. Press the
button on the windscreen wiper lever
A
wheel* to select the current speed. The instrument panel display gives the
selected speed, for example, Speed warning 120 km/h. You have five sec-
onds to reset the speed between 30 km/h and 250 km/h using rocker
switch or buttons or on the multifunction steering wheel*. Press
B
 
the button or wait five seconds until the speed is stored and the
OK
l/h
OK
or the multifunction steering
