Seat Leon 2012 Owner's Manual page 265

– Take the bulbholder out pressing on the securing pins and ex-
⇒ f ig.
tract it outwards
– Replace the faulty bulb, rotating it to the left and outwards.
– Installation is done in the reverse order.
WARNING
If a bulb is replaced in a tail light assembly with LED, do not pull too hard
on the bulb holder. This may damage the wiring of the LED module.
Side turn signals
– Press the turn signal on one of its sides to take it out.
– Remove the bulb holder from the turn signal.
– Remove the failed glass bulb and replace with a new bulb.
Safety First
172.
Fig. 173 Side turn signal
Operating Instructions
– Insert the bulb holder in the turn signal guide until it clicks into
place.
– First place the turn signal in the opening in the bodywork, fixing
⇒ f ig.
the tabs 173, arrow
– Insert the turn signal as shown by the arrow

Practical Tips
If and when
.
1
⇒ f ig.
173.
2
Technical Specifications
263
