260
If and when
– Remove the connector
– Unclip the retainer spring
right.
– Extract the bulb and fit the replacement so that the rim of the
attachment plate is on the reflector cut-out.
Main beam lights
⇒ f ig. 165
from the bulb.
2
⇒ f ig. 165
pressing inwards to the
3
Fig. 166 Main beam
headlights
– Raise the bonnet
⇒ f ig. 166
– Remove the cover
⇒ f ig. 167
– Remove the connector
⇒ f ig. 167
– Press the spring
– Extract the bulb and fit the replacement so that it sits correctly
into the cut-out on the reflector.
– Installation is done in the reverse order.
Fig. 167 Main beam
headlights
by pulling on this.
C
from the bulb.
1
inwards and to the right.
2