Seat Leon 2012 Owner's Manual page 132

130 Lights and visibility
Note
● The automatic anti-dazzle function will only work properly if the sun
blind* for the rear window is retracted and there are no other objects pre-
venting light from reaching the rear view mirror.
● If you have to stick any type of sticker on the windscreen, do not do so in
front of the sensors. Doing so could prevent the anti-dazzle function from
working well or even from working at all.
Exterior mirrors
The exterior mirrors can be adjusted using the rotary knob
in the centre console.
Basic setting of exterior mirrors
⇒ f ig. 86
1. Turn knob to position L (left exterior mirror).
2. Turn the rotary knob to position the mirror so that you have a
good view to the rear of the vehicle.
3. Turn knob to position R (right exterior mirror).
4. Swivel the rotary knob to position the mirror so that you have a
good view to the rear of the vehicle ⇒ .

Heating the exterior mirrors*
– Turn the knob forwards to the central position
heated rear view mirrors warm up and the heated windscreen*
in the wiper blade rest area is activated ⇒ p age 126.
– The exterior mirror heating is not activated at temperatures
above approximately 20 °C.
Folding in exterior mirrors*
– Turn the control
mirrors. You should always fold in the exterior mirrors if you are
driving through an automatic car wash. This will help prevent
damage.
Folding exterior mirrors with convenience control*
– The exterior mirror will fold back automatically with conven-
ience closing (with the remote or the key)
– To unfold it again, open the door and switch on the ignition.
Fig. 86 Controls of exte-
rior mirrors
Folding exterior mirrors back out to the extended position*
– Turn the knob to another position to fold the exterior mirrors
back out ⇒ .
so that the
1
⇒ f ig. 86
to position  to fold in the exterior
