Seat Leon 2012 Owner's Manual page 249

Wheel trims
The wheel trims must be removed to gain access to the
wheel bolts.
Removing
– Insert the extraction hook from the tools into the designated
ring, located in one of the bolt hole covers of the wheel cover
⇒ f ig.
155.
– Pull off the hub cap.
Safety First
Fig. 155 Changing the
wheel: Removing a hub
cap
Operating Instructions
Wheel covers*
The wheel covers must be removed for access to the wheel
bolts
Removing
– Remove the wheel cover using the wire hook.
– Hook this into one of the cut-outs of the wheel cover.
Fitting
– Fit the wheel cover onto the wheel rim by pressing it firmly. Put
pressure initially on the point of the cut-out for the valve. Then
press the wheel cover onto the steel rim so that it engages all
round.

Practical Tips
If and when 247

Technical Specifications