Seat Leon 2012 Owner's Manual page 155

The LEDs on the Climatronic controls indicate that the selected function has
been activated.
In addition, the radio or radio and navigation displays mounted at factory
briefly display the current settings of the Climatronic if any are modified.
The symbols used on the radio or radio and navigation displays are the
same as the symbols used for the Climatronic controls.
Automatic mode
In automatic mode air temperature, air flow and distribution
are automatically regulated so that a specified temperature
is attained as quickly as possible and then maintained.
The temperature can be adjusted separately for the left and right
sides of the vehicle interior.
Switching on automatic mode
⇒ f ig. 110
– Press the
AUTO
radio display (high fan speed).
– Press the button again
AUTO
on the radio display (low fan speed).
Depending upon the version and finish, the vehicle may include:
Safety First
button. "AUTO High" is shown on the
⇒ f ig.
110. "AUTO Low" is shown
Operating Instructions
A pleasant temperature is quickly reached in automatic mode at a tempera-
ture of 22 °C (72 °F). Therefore, we recommend you not to change this ad-
justment, except as necessary to suit individual preferences or particular cir-
cumstances. It is possible to select interior temperatures from +18 °C
(64 °F) to +26 °C (80 °F). These are approximate temperatures and the ac-
tual temperature may be slightly higher or lower depending on the ambient
 conditions.
Climatronic maintains a constant temperature. The temperature of the air
supplied to the interior, the blower speed and the air distribution are regu-
lated automatically. The system also considers the sunlight radiation, so
there is no need for manual readjustment. Therefore, automatic mode al-
most always provides the best comfort for the vehicle occupants throughout
the year.
Automatic mode is switched off whenever an adjustment is made using the
buttons for the air distribution, air flow or
. The temperature will continue to be regulated within the parameters

manually selected by the user.
Note
There are two automatic modes:
● Automatic mode LO: This calculates the air flow for two people.
● Automatic mode HI: This calculates the air flow for more than two peo-
ple.
Practical Tips
Air conditioning
or the air recirculation button


Technical Specifications
153