Registration light
– To remove the light cover, unscrew the bolts
– Remove the bulb, moving it in the direction of the arrow and
⇒ f ig.
outwards
177.
Safety First
Fig. 176 Number plate
light
Fig. 177 Number plate
light
⇒ f ig.
176.
Operating Instructions
– Installation is done in the reverse order.
Glove compartment lamp*
– Insert screwdriver above, between the light and the glove com-
partment.
– Carefully remove the light Next lift the light out sideways.
– Replace the bulb.
– Insert the light on the connector side, first underneath then
push at the top until it clicks into place.
Practical Tips
If and when
265
Technical Specifications