Seat Leon 2012 Owner's Manual page 156

154 Air conditioning
Manual mode
In manual mode you can adjust the air temperature, air flow and distribution as required.
Switching on manual mode
– To enter manual mode, press one of the buttons
to or press the air flow control
5
shown on the radio or navigator display.
Temperature
There are separate temperature selectors for the left and right sides of the
vehicle interior. The selected temperature is displayed above the selector. It
is possible to select interior temperatures from +18 °C (64 °F) to +26 °C
(80 °F). These are approximate temperatures and the actual temperature
may be slightly higher or lower depending on the ambient conditions.
If you select temperatures below 18 °C (64 °F) the indication
on the screen. In this setting the system runs at maximum cooling output
and the temperature is not regulated.
⇒ f ig. 113
1
. The selected function is
10
LO will appear
Fig. 113 On the dash panel: 2C Climatronic controls.
If you select temperatures above 26 °C (80 °F) the indication
on the screen. In this setting the system runs at maximum heating output
and the temperature is not regulated.
Blower
The air flow may be adjusted freely using the control
blower running at a low setting to ensure a constant flow of fresh air into
the vehicle. Pushing the button  to the minimum -1, turns the Climatronic
off.
Air distribution
The air distribution is adjusted using the buttons
possible to open and close some of the air vents separately.
Switching the air conditioning on and off
When the button is on (LED lit), the air conditioning system is on.
AC
HI will appear
. Always have the
10
, and . It is also
  
