Seat Leon 2012 Owner's Manual page 124

122 Lights and visibility
Turn signal and main beam headlight lever
The turn signal and main beam lever also operates the park-
ing lights and the headlight flasher.
The turn signal and main beam headlight lever has the following
functions:
Switching on the turn signals
– Move the lever all the way up
all the way down to indicate left.
2
Signalling a lane change
– Push the lever up or down
1
resistance and then release it. The turn signal will flash several
times. The corresponding warning lamp will also flash.
Fig. 76 Turn signal and
main beam headlight lev-
er
⇒ f ig. 76
to indicate right, and
1
to the point where you incur
2
Switching main beam on and off
– If the dipped lights are on, push the lever forward
to switch on the main beam.
– Push the lever towards the steering wheel
off the main beam.
Headlight flashers
– Pull the lever towards the steering wheel
flasher.
Switching on parking lights
– Switch the ignition off and remove the key from the lock.
– Move the lever up or down to turn the right or left-hand parking
lights on, respectively.
WARNING
The main beam can dazzle other drivers. Risk of accident! Never use the
main beam headlights or the headlight flasher if they could dazzle other
drivers.
Note
● The turn signals only work when the ignition is switched on. The corre-
sponding warning lamp  or  flashes in the instrument panel. The warn-
ing lamp  flashes when the turn signals are operated, provided a trailer is
correctly attached and connected to the vehicle. If a turn signal bulb is de-
fective, the warning lamp flashes at double speed. If the trailer turn signal
bulbs are damaged, warning lamp  does not light up. Change the bulb.
● The main beam headlights can only be switched on if the dipped beam
headlights are already on. The warning lamp  then comes on in the instru-
ment panel.
⇒ f ig. 76
3
⇒ f ig. 76
to switch
4
to operate the
4
