Seat Leon 2012 Owner's Manual page 273

Towing eyes
Fitting the towing eye
– Take the towing ring from the on-board tool set.
Safety First
Fig. 182 The front right
section of the vehicle:
Fitting the front towing
eye
Fig. 183 Fitting the tow-
ing eye to the rear of the
vehicle
Operating Instructions
– Remove the front cover by pressing down on its left-hand side.
– Remove the rear cover by pressing down on the right hand side,
for FR and Cupra models. For all other versions, remove the rear
cover by pressing on the lower part.
– Screw the towing eye as shown by the arrow anti-clockwise to
⇒ f ig. 182
the limit position in the front
ded hole.
Practical Tips
If and when 271
⇒ f ig. 183
or rear threa-

Technical Specifications