Advertisement
11. Troubleshooting
Problem
Burner will not light using
the ignition system
Burner will not light with a
match
Low flame or flashback
(fire in burner tube— a
hissing or roaring noise
may be heard)
Gas valve knob difficult to
turn
For reference and correspondence, record your serial number here.
(See sticker on side of barbecue body.)
Serial No.
__________________
This number may be required when ordering spare parts or accessories. A part reference number may also be
required where applicable.
Possible Cause
LP gas bottle is empty
Faulty regulator
Obstructions in burner
Obstructions in gas jets or gas
hose
Electrode or ignition button wire is
loose or disconnected on electrode
or ignition unit
Electrode or wire is damaged
Faulty integral ignitor
LP gas bottle is empty
Faulty regulator
Obstructions in burner
Obstructions in gas jets or gas
hose
LP gas bottle too small
Obstructions in burner
Obstructions in gas jets or gas
hose
Windy conditions
Integral ignition system jammed
Gas valve jammed
Solution
Replace with full bottle
Have regulator checked or replaced
Clean burner
Clean jets and gas hose
Reconnect wire
Change electrode and wire
Change ignitor
Replace with full bottle
Have regulator checked or replaced
Clean burner
Clean jets and gas hose
Use larger bottle
Clean burner
Clean jets and gas hose
Use barbecue in a more sheltered position
Replace gas valve
Replace gas valve
Published October 2015
Advertisement
