Volvo Penta AQUAMATIC 280 Workshop Manual page 54

884263
2. Install the bigger roller bearing on the gear wheel by
pressing it on. Use special tool 884263.
NOTE! Protect the gear teeth. Then install a new
clamping sleeve (1).
3. Install the input gear in the double bearing box and
press on the smaller roller bearing in a way that a
1 mm (0,0394"), approximatively, clearance is ob-
tained. Use special tool 884263.
NOTE! Protect the gear teeth.
1
4. Press down the sealing ring to the shoulder. Use
special tool 884932 with handle 991801 and special
tool 884938. Then install the locking ring with special
tool 3850608.
884263
5. Coat the O-ring (1) with grease and insert it in its lo-
cation. Push the shoulder washer into its location
against the universal joint.
9991801
Repair instructions
884932
884938
1
51