Volvo Penta AQUAMATIC 280 Workshop Manual page 34

5. Remove the 4 screws holding the shift mechanism
and remove the mechanism.
NOTE! Be sure to remove the shift shoe (1) with the
shift mechanism.
6. Remove the 4 Allen-head screws holding the
clamping ring (1) and pull out the universal joint and
the double bearing box.
NOTE! Take care of the shims (2).
7. Remove the 4 screws holding the gear housing cov-
er and remove the cover.
NOTE! The front right hand screw (1) is a hollow
screw with an O-ring seal. Take care of the shims
(2).
8. Remove the left hand threaded nut (1) on the ver-
tical shaft. Use special tool 884830 as a counter-hold
on the splines shaft when removing the nut.
Repair instructions
1
31