Repair instructions
14. Coat the contact surface with Volvo Penta part no.
1141570-0 sealant and install the sealing ring (1) in a
way that the sealing for the front right hand screw
aligns with the corresponding recess in the cover.
15. Install the calculated number of shims and tighten
the cover.
NOTE! The front right hand screw is a hollow screw
and shall be provided with an O-ring (1) under its
head. Tighten the screws with a torque of 15 Nm
(11 lb.ft.). Tighten diagonally!
45