Remove the FBDIMM.
4.
To replace the component, reverse the removal procedure.
Hard drive backplane
To remove the component:
Power down the server blade (on page 22).
1.
Remove the server blade (on page 22).
2.
Remove the access panel
3.
Remove all hard drives
4.
Remove all hard drive blanks
5.
CAUTION: Remove all hard drives and hard drive blanks before removing the hard drive backplane.
Remove the hard drive backplane.
6.
("Access
panel" on page 23).
("Hard
drive" on page 24).
("Hard drive
blank" on page 23).
Removal and replacement procedures 26