Remove the Smart Array E200i Controller cache module.
7.
To replace the component, reverse the removal procedure.
HP Smart Array E200i Controller battery pack
To remove the component:
Power down the server blade (on page 22).
1.
Remove the server blade (on page 22).
2.
Remove the access panel
3.
Remove all hard drives
4.
Remove all hard drive blanks
5.
Remove the hard drive backplane
6.
Remove the Smart Array E200i Controller cache module
7.
module" on page 29).
("Access
panel" on page 23).
("Hard
drive" on page 24).
("Hard drive
blank" on page 23).
("Hard drive
backplane" on page 26).
("HP Smart Array E200i Controller cache
Removal and replacement procedures 30