Disposal Information; Declaration Of Conformity; Exemption From Liability - Flex LRP 1503 VRA Original Operating Instructions

LRP 1503 VRA
Repairs
Repairs may be carried out by an authorised
customer service centre only.
Replacing wearing parts
During the operating time of the belt sander the
felt pads on the rocker wear out. Spare parts
are available from the manufacturer or your
dealer.
Spare parts and accessories
Spare-part/Accessory
Handle
Felt pad
– large
– small
Plastic carrying case
Other accessories can be found in the
manufacturer's catalogues.
Exploded drawings and spare-part lists can
be found on our homepage:
www.flex-tools.com

Disposal information

t^okfkd>
oÉåÇÉê=êÉÇìåÇ~åí=éçïÉê=íççäë=ìåìë~ÄäÉ=
Äó êÉãçîáåÖ=íÜÉ=éçïÉê=ÅçêÇK
EU countries only
Do not throw electric power tools
into the household waste!
In accordance with the European Directive
2012/19/EC on Waste Electrical and
Electronic Equipment and transposition into
national law used electric power tools must
be collected separately and recycled in an
environmentally friendly manner.
mäÉ~ëÉ=~ëâ=óçìê=ÇÉ~äÉê=~Äçìí=Çáëéçë~ä=
çéíáçåë>
We declare under our sole responsibility that
the product described under "Technical
specifications" conforms to the following
standards or normative documents:
Responsible for technical documents:
FLEX-Elektrowerkzeuge GmbH, R & D
Order no.
Bahnhofstrasse 15, D-71711 Steinheim/Murr
194.034
324.728
324.736
Eckhard Rühle
327.603
Manager Research &
Development (R & D)
29.06.2015
FLEX-Elektrowerkzeuge GmbH
Bahnhofstrasse 15, D-71711 Steinheim/Murr

Exemption from liability

The manufacturer and his representative are
not liable for any damage and lost profit due to
interruption in business caused by the product
or by an unusable product.
The manufacturer and his representative are
not liable for any damage which was caused by
improper use of the power tool or by use of the
power tool with products from other
manufacturers.
klqb

-Declaration of Conformity

EN 60745 in accordance with the regu-
lations of the directives
2004/108/EC (until 19.04.2016),
2014/30/EU (from 20.04.2016),
2006/42/EC, 2011/65/EC.
Klaus Peter Weinper
Head of Quality
Department (QD)
19