Maintenance And Care; Disposal Information; Declaration Of Conformity; Exemption From Liability - Flex ORE 3-150 EC Original Operating Instructions

Maintenance and care

WARNING!

Before performing any work on the electric
power tool, pull out the mains plug.
Cleaning
Regularly clean the power tool and

ventilation slots.
Using dry compressed air, regularly

blow out the housing interior and motor
through the ventilation slots.
Housing
NOTE
Do not loosen the screws on the housing.
Non-compliance will deem the guarantee
obligations of the manufacturer null and void.
Repairs
Repairs may be carried out by an authorised
customer service centre only.
Spare parts and accessories
Sanding sheets for different application
areas and other accessories can be found
in the manufacturer's catalogues.
Exploded drawings and spare-part lists
can be found on our homepage:
www.flex-tools.com

Disposal information

WARNING!
Render redundant power tools unusable
by removing the power cord.
EU countries only
Do not throw electric power tools
into the household waste!
In accordance with the European Directive
2012/19/EU on Waste Electrical and Electronic
Equipment and transposition into national law
used electric power tools must be collected
separately and recycled in an environmentally
friendly manner.
NOTE
Please ask your dealer about disposal
options!
16
ORE 3–150 EC / ORE 5–150 EC

-Declaration of Conformity

We declare under our sole responsibility
that the product described under "Technical
specifications" conforms to the following
standards or normative documents:
EN 62841 in accordance with the
regulations of the directives
2014/30/EU, 2006/42/EC, 2011/65/EU.
Responsible for technical documents:
FLEX-Elektrowerkzeuge GmbH, R & D
Bahnhofstrasse 15, D-71711 Steinheim/Murr
Eckhard Rühle
Manager Research &
Development (R & D)
29.05.2019 / FLEX-Elektrowerkzeuge GmbH
Bahnhofstrasse 15, D-71711 Steinheim/Murr

Exemption from liability

The manufacturer and his representative
are not liable for any damage and lost profit
due to interruption in business caused by
the product or by an unusable product.
The manufacturer and his representative
are not liable for any damage which was
caused by improper use of the power tool or
by use of the power tool with products from
other manufacturers.
Klaus Peter Weinper
Head of Quality
Department (QD)