Transferring Using A Bluetooth ® Connection - Elcometer 456 Operating Instructions Manual

2. Switch on your gauge and ensure the Reading
Screen is displayed.
3. Start the software and follow the instructions
included with the software.
8.2 TRANSFERRING USING A BLUETOOTH
CONNECTION
Full instructions on how to interface your gauge with
ElcoMaster and download data are included with
the ElcoMaster help file supplied with the software.
VERIFYING A BLUETOOTH
®
When a Bluetooth
between your gauge and a PC, the gauge produces
two high pitch beeps and shows a flashing
®
Bluetooth icon in the top right corner of the
display. When the connection is closed or lost, the
gauge produces two lower pitch beeps and the icon
is removed.
®
BLUETOOTH PIN
If at any time ElcoMaster requests a PIN number for
your gauge, switch on your Elcometer 456
select MENU>ABOUT>GAUGE INFORMATION.
®
CONNECTION
connection is established
The display will show the Bluetooth
example shown in Figure 56, '19400'):
®
Each gauge has a different PIN - use the PIN shown
on your Gauge Information screen.
TRANSFERRING MEASUREMENTS AS THEY
ARE TAKEN
Measurement data can be transferred from your
gauge to a PC via a Bluetooth
readings are taken.
Your gauge includes a feature which checks that a
reading taken
successfully at your PC. If the reading does not
arrive at your PC, an error message is displayed on
your gauge and further readings cannot be taken
until it is cleared.
and
3
Figure 56. PIN code
®
connection as the
by the gauge
R
®
PIN (in the
has arrived
41