Interfaces; Taking A Reading; Before You Start - Elcometer 456 Operating Instructions Manual

R

2.9 INTERFACES

Your gauge is fitted with a Bluetooth
which makes the
'welcome' screens and transfer of information to
and from a PC quick and easy - see "Transferring
readings to a computer" on page 40.
If you do not have a Bluetooth
PC, you can still connect your gauge to your PC by
using the PC connection cable supplied and the
RS232 5-pin connector on the side of the gauge.
RS232 5-pin connector
Figure 7. RS232 interface
12
®
interface
creation of personalised
®
interface on your

3 TAKING A READING

3.1 BEFORE YOU START

• Are you using the correct type of probe?
See "Probes" on page 42.
• Is the probe calibrated?
See "Calibration adjustment" on page 23.
• Do you require statistics?
See "Statistics" on page 31.
• Do you want to save readings in memory?
See "Batching" on page 33.
• What units of measurement do you want to
use?
See "UNITS:" on page 21.