About Your Gauge - Elcometer 456 Operating Instructions Manual

R
Thank you for your purchase of this Elcometer 456
Coating Thickness Gauge. Welcome to Elcometer.
Elcometer are world leaders in the design,
manufacture and supply of coatings inspection
equipment. Our products cover all aspects of
coating inspection, from development through
application to post application inspection.
The Elcometer 456 3 Coating Thickness Gauge is a
world beating product. With the purchase of this
gauge you now have access to the worldwide
service and support network of Elcometer. For
more information
www.elcometer.com.

1 ABOUT YOUR GAUGE

The Elcometer 456 Coating Thickness Gauge is a
3
handheld gauge
measurement of the thickness of coatings on metal
substrates.
4
visit our website
for fast and accurate
The gauge is available in
3
three versions;
Standard and Top. This
manual describes
operation
Elcometer 456
All versions of the gauge
feature an easy-to-use
menu driven
interface which guides the
user through tasks such
as gauge configuration
at
and
adjustment.
The gauge is available either with a built-in integral
probe or as a separate probe version. A wide range
of probes is available to suit requirements - see
page 42. Separate probes may be standard,
miniature or Plug in Integral Probes (PINIP™), and
must be ordered separately.
Basic,
the
of the
Top.
3
graphical
Figure 1.
Elcometer 456
Coating Thickness
calibration
Gauge
R
3