Table of Contents
Advertisement
WARNING:
This battery pack contains a toxic substance (cadmium)
and must be disposed of properly. Do not disassemble,
short, or dispose of this battery in a fire which might
cause it to release toxic substances or explode. Contact
your local authorities for appropriate disposal and for
additional information.
CONNECTING THE BATTERY CHARGER
A
battery
Printer. There is an input connector on the right hand side
of the battery pack.
connector and plug the battery charger into an outlet. The
printer will not operate with the battery charger plugged in.
WARNING:
Use of chargers other than those supplied by Panduit may
damage or shorten the life of the printer or battery pack!
BATTERY POWER
It
is
recommended the user charge the battery for a
minimum of 15 hours before operating the printer. When
the battery pack power is low, the printer will display
"WARNING: LOW BATTERY" until the user presses any
key
to acknowledge the message. To obtain maximum
battery life the battery should continue to be used until the
PULL
charger has been included with your LS3E
Insert the charger plug into the
PULL
FIGURE 1
5
SQUEEZE
Advertisement
Table of Contents
