Custom Formatting Option - Panduit Pan-Quik LS3E Operator's Manual

Step 3: Entering the Label Code and Pressing the Letter Q
to Enter the Quik-Key TM Options:
All LS3E label rolls have a 4 digit label code. The label code
can be found inside the label core, on a label attached to the
first label on the roll and also on the box label. Using the key
pad, key in the 4 digit code, press the "Q" Key. The screen
will now display the Quik-Key format screen and allow you
TM
to enter up to 6 Quik-Key TM options, as listed on page 11 and
on the back of your battery pack. When all options are
complete press the ENTER Key to exit the Quik-Key TM options
and return to the label code menu. Press the ENTER Key to
exit to the legend entry screen.
Step 4: Entering the Desired Legend:
See SECTION 1: Using the SETUP Menu, Step 5.
Step 5: Printing Your Labels:
See SECTION 1: Using the SETUP Menu, Step 6.
SECTION 3:
Using the Custom Formatting Option:
Step 1: Turning the Printer On:
See SECTION 1: Using the SETUP Menu, Step 1.
Step 2: Loading the Labels:
See SECTION 1: Using the SETUP Menu, Step 2.
Step 3: Entering the Label Code and the Custom Format-
ting Option:
All LS3E label rolls have a 4 digit label code. The label code
can be found inside the label core, on a label attached to the
first label on the roll and also on the box label. Using the key
pad, key in the 4 digit code number and then the letter
corresponding to the desired custom formatting option as
listed on page 13 (e.g., C, W, T, R, or S). Press the ENTER Key
to finish your selection.
12