Panduit Pan-Quik LS3E Operator's Manual page 11

Panduit user's manual printer ls3e

Table of Contents

To unload the labels, press and release the SHIFT Key and then

press and release the FEED Key. When reverse feeding labels

that have been printed, or have moved past the ribbon tearbar,

push labels toward drive roller while reverse feeding to prevent

snagging of labels, or tear off excess labels before unloading.

WARNING:

When using heat shrink tubing, the liner must be cut

or torn along the perforation by hand. Trying to use

the tear bar to cut the heat shrink liner will not work,

and may damage the tear bar.

Step 3: Entering the Label Code:

All LS3E label rolls have a 4 digit label code. The label

code can be found inside the label core, on a label

attached to the first label on the roll, and also on the box

label. Using the key pad, key in the 4 digit code and

then press the ENTER Key, or simply press the ENTER

Key

displayed in the LCD.

Step 4: Selecting the Desired Format:

To view the format of your label or to change that format

press the SETUP Key. This will display the SETUP

menu screens where you may view or change the label

format. The SETUP menu consists of 11 menus with

between 1 and 11 options per menu. To change between

each menu use the

within each menu use the

the * beside it shows the selected option. To select an

option, press the ENTER Key. An * will appear to the

left verifying your selection. Once all desired options

and features have been selected press the "X" Key and

this will display the SETUP menu exit screen. Press the

ENTER Key to exit the SETUP menu and you are ready

to enter your label legend.

desired

label

code

Keys. To view options

Keys. The option with

already

Table of Contents