Connection Failures - Intermec Antares 2420 User Manual

Connection Failures

If the TRAKKER fails to connect properly, you will receive a
non-acknowledgment error ("Naked 0"). A screen similar to the following will be
displayed.
Check the following items:
• If modems are being used, check that the phone number is correct.
• Check that TKRS is running on the host if you are using direct connect or
• If modems are being used, make sure that you entered Y to modem
• Check that all cables and plugs are securely connected.
• Check that the correct connector is being used (see Appendix F).
FPD/318-03
modem connect.
connect in TKRS.
LOCAL OPERATION
3-21