Internet Connection; Ethernet Connections - Intermec CK60 User Manual

Chapter 2 — Windows CE

Internet Connection

28
Tap Open IConnect to access the IConnect application.

Ethernet Connections

The following information applies to CK60 Computers using Ethernet:
IP Address
The IP Address row is for the current IP address. If the address is valid, a
green check mark appears to the left and the field contains the address. If
invalid, a red X is shown to the left. Tap IP Address to configure the IP set-
tings for the CK60 Computer and view other IP-related addresses.
The DHCP dialog contains information about the current IP address. You
can enter an IP address, check either Static IP or DHCP, then tap Update
to commit these changes. Tap Release or Renew near the bottom to either
release or renew changes to the DHCP address.
LAN Info
Tap LAN Info to access diagnostic pages.
Link
This row displays the current link speed if valid. A green check mark
appears to the left if the Ethernet cable is attached to the CK60 Computer.
A red X appears if the Ethernet cable is detached.
CK60 Handheld Computer with Windows CE User's Manual
Tap this to test the connection