Performance And Diagnostics - Avaya G450 Configuration Manual

SPRT Timer TC2-TA02
Use this field to set the value of the acknowledgement update timer of Transport Channel 2.
This field accepts values between 50 and 1000 but only in multiples of 10. The default value
is 500.
SPRT Timer TC2-TR03
Use this field to set the value of the retransmit timer of Transport Channel 2. This field accepts
values between 50 and 1000 but only in multiples of 10. The default value is 500.
SSE Inter-Packet Interval
Use this field to assign an interval between the State Signaling Events (SSE) packets. You
can enter a value between 10 to 40 with the increments of 10. The default value is 20 mSec.
SSE Repetition Redundancy (Packets)
Use this field to assign the number of redundant SSE packets for transmission. The
redundancy option provides robust transport of data packets across an IP-based network. You
can enter a value from 0 to 3. The default value is 3.
V.42 Error Correction
V.42 is an error correction protocol for V.150.1 media transport between modems. If you set
this field to y, the gateways use the V.42 Error Correction protocol. The default value is n.

Performance and Diagnostics

Additional performance and diagnostic information for V.150 Modem over IP calls is added to
the Communication Manager List Trace and List Measurement reports.
For more information on the List Trace and List Measurement features refer to Maintenance
Commands for Avaya Aura
Configuring V.150.1 on Avaya G450 and G430 Branch Gateway
®
Communication Manager, Branch Gateways and Servers.
Performance and Diagnostics
May 2014 39