Wireless Access Control - Tenda teg2124t User Manual

---------------------------------------------------------------------------------------------------------------------------------

2.3 Wireless Access Control

Specify a list of devices to "Permit" or "Forbid" a connection to your wireless network via the
devices' MAC Addresses.
Click Wireless -> Wireless Access Control to enter the configuration screen.
There are three options available: Disable, Forbid and Permit.
A. If you want to allow all wireless clients to join your wireless network, select Disable.
B. If you want to allow ONLY the specified wireless clients to join your wireless network, select
Permit.
C. If you want to disallow ONLY the specified wireless clients to join your wireless network, select
Forbid.
Wireless Access Control Application Example:
To only allow your own notebook at the MAC address of C8:3A:35:CC:34:25 to join your wireless
network
Configuration Procedures:
Select the wireless network (SSID) you wish to enable Access Control on.
Select Permit.
Enter the MAC address of the wireless device you want to restrict. Here in this example, enter
C8:3A:35:CC:34:25.
57
III Features &Connectivity