Tenda teg2124t User Manual page 21

C. If your ISP provides you with an Ethernet cable from the incoming Internet side IP information
(IP address, subnet mask, gateway IP address, DNS server address), your ISP uses a static IP
connection. See Static IP
D. If you acquire Internet access from a remote AP on an existing network see
Repeater Mode.
Hotel Mode (DHCP)
If your ISP does not give you any IP or user name/password info (your ISP uses a DHCP
connection), simply connect the network cable from the incoming Internet side to the router and
the router to your PC or simply search for and connect to your wireless router from your notebook.
No configuration needed, simply plug and play.
For typical network topology, see below:
Tip------------------------------------------------------------------------------------------------------------------------
1. If you already have a wired router, you can use this wireless router (operating in this mode) to
convert the wired network into a wireless network. Simply connect the WAN port on this wireless
router to a LAN port on the wired router and a wireless access point will be created instantly.
2. If your computer is set to a static or fixed IP address (this is uncommon), change it to obtain an
IP address automatically from the router. For more information, see
TCP/IP Settings.
---------------------------------------------------------------------------------------------------------------------------------
.
16
II Quick Internet Setup
Universal
Appendix 1 Configure PC