3.2 Traffic Statistics
Traffic Statistics meter allows you to monitor and view the volume of traffic used by LAN devices.
Click QoS-> Traffic Statistics to enter the Statistics screen.
Tip------------------------------------------------------------------------------------------------------------------------
If you suspect some PCs behind your router are consuming a large volume of bandwidth
(downloading videos, etc) you can enable this Traffic Statistics meter feature to find out which PCs
are overusing the traffic. Enabling the Traffic Statistics feature may degrade the router's
performance. Do not enable it unless necessary.
--------------------------------------------------------------------------------------------------------------------------------
Configuration Procedures:
Check Enable Traffic Statistics.
Click OK to save your settings.
Knowledge Center----------------------------------------------------------------------------------------------
1.
IP Address: Displays the IP addresses of the PCs that have connected to the device.
2.
Uplink Rate: Displays the upload speed (KByte/s) of a corresponding PC.
3.
Downlink Rate: Displays the download speed (KByte/s) of a corresponding PC.
4.
Sent Message: The number of packets transmitted by a corresponding PC upon traffic
statistics meter startup.
5. Sent Bytes: The number of bytes transmitted by a corresponding PC upon traffic statistics
meter startup. The unit is MByte.
6. Received Message: The number of packets received by a corresponding PC upon traffic
statistics meter startup.
7. Received Bytes: The number of bytes received by a corresponding PC upon traffic statistics
60
III Features &Connectivity