Quick Internet Setup; Getting Prepared; Install - Tenda teg2124t User Manual

1 Getting Prepared

Before you start the installation process, you need to prepare the following:
Item
Router
PC
Ethernet Cable
Ethernet Cable from
the incoming Internet
side
Gather ISP
Information

2 Install

Note----------------------------------------------------------------------------------------------------------------------
Before you start, make sure you can access Internet by directly connecting the Ethernet cable
from the incoming Internet side to your PC.
---------------------------------------------------------------------------------------------------------------------------------
Plug the device into a power outlet (For better wireless performance, place it near the center of
the area where your computers, smart phones and other devices operate, and preferably within
line of sight to your wireless devices.)
II Quick Internet Setup
Description
Find it in your package
Should have a installed IE8 or higher browser
You will need it to connect your PC to the router
This is provided by your ISP
Your Internet service provider (ISP) should have provided you with all
of the information needed to connect to the Internet. If you cannot
locate this information, ask your ISP to provide it.
l
If your ISP uses a PPPoE Internet connection, you will need ISP
login name and password.
l
If you use a DHCP Internet connection, no information is
needed.
l If your ISP gives you a fixed or static IP address for Internet
connection, you will need to gather the following information:
1) IP Address
2) Subnet Mask
3) Gateway
4) DNS Server
5) Alternate DNS Server (Optional)
4
II Quick Internet Setup