Tenda teg2124t User Manual page 26

Universal Repeater Mode
Use this universal repeater mode to extend your existing wireless network coverage.
For application scenario, see below:
In this mode, you only need to configure the following settings on the repeater wireless router:
l
Configure LAN IP: Specify an IP address that is in the same subnet as yet different from the
remote wireless router for this Tenda wireless router.
l
Universal Repeater: Configure this router to bridge the remote wireless router for extended
network coverage.
Tip ---------------------------------------------------------------------------------------------------------------------
Before you start, make sure you have the following information:
1. Remote router's SSID, security mode, cipher type and security key.
2. Remote router's LAN IP address.
3. No Ethernet cable is connected to the Repeater wireless router's WAN port.
21
II Quick Internet Setup