Lan Settings - Tenda teg2124t User Manual

Click Advanced -> WAN Speed to enter the WAN port mode screen. Here you can configure the
router's WAN speed and duplex mode.
Tip-------------------------------------------------------------------------------------------------------------------------
1. The best port mode is often just the factory default of "Auto".
2. In some situations, you might need to change the port mode. For example, if the cable
connected to your router's WAN port is too long, you may need to use 10M full-duplex or 10M
half-duplex for better performance.
---------------------------------------------------------------------------------------------------------------------------------

1.5 LAN Settings

Click Advanced -> LAN Settings to enter the configuration screen. Here you can configure the
LAN IP address. This IP address is to be used to access the router's settings through a web
browser. Be sure to make a note of any changes you apply to this page.
Tip ----------------------------------------------------------------------------------------------------------------------
1. Default IP address and subnet mask are respectively 192.168.2.1 and 255.255.255.0.
2. This router does not support VLSM.
3. Be sure to make a note of any changes you apply to this page. If you change the LAN IP
address of the router, you have to open a new connection to the new IP address and log in
again.
---------------------------------------------------------------------------------------------------------------------------------
36
III Features &Connectivity