Wireless Settings; Wireless Basic Settings - Tenda teg2124t User Manual

2 Wireless Settings

2.1 Wireless Basic Settings

Here you can configure the basic wireless settings of the router. This router supports two
operating modes: Wireless Access Point (AP) and WDS Bridge Mode.
A. To only use the wireless network delivered by this router, select Wireless Access Point (AP).
B. To extend an existing wireless network, select WDS Bridge Mode.
Wireless AP Mode
Tip-----------------------------------------------------------------------------------------------------------------------
1. By default, this device operates in the Wireless Access Point (AP) mode.
2. The primary SSID is defaulted to Tenda_XXXXXX, where XXXXXX is the last six characters in
the device's MAC address. You can find this SSID on the label attached on the bottom of the
device.
3. If you are not an advanced user, it is advisable to only change the primary SSID (name of the
network) and channel and leave other items unchanged.
4. The device supports two SSIDs: primary SSID and secondary SSID. The secondary SSID is
optional. By default, the secondary SSID is disabled.
5. Instructions to configure the primary SSID also apply to the secondary SSID. The primary SSID
is used as an example below to illustrate all wireless related features.
---------------------------------------------------------------------------------------------------------------------------------
42
III Features &Connectivity