Click Home on the appearing screen.
The Setup Wizard screen appears.
Tip-------------------------------------------------------------------------------------------------------------------------
1. If you access Internet by connecting to the Ethernet cable from the incoming Internet side, see
Static
IP.
2. If you don't want to use the Auto-switch feature, check the Disable Auto-switch mode box.
3. You can also enable the Auto-switch mode feature after you manually set up Internet and your
wireless network so that your router can fit different environment, eliminating manual intervention.
---------------------------------------------------------------------------------------------------------------------------------
5.2 Manual Internet Setup& Wireless Security Setup
Read the following and determine your Internet connection type. Then follow the right setup
wizard.
A.
If your ISP provides you with an Ethernet cable from the incoming Internet side but no ISP login
account or IP information, your ISP uses a DHCP connection. See DHCP.
B.
If your ISP provides you with an Ethernet cable from the incoming Internet side and ISP login
account, your ISP uses a PPPoE connection. See PPPoE.
15
II Quick Internet Setup