Wireless Access Control - Tenda F357 User Manual

2.4 Wireless Access Control

The Access Control feature allows you to specify a list of devices to
Permit or Forbid a connection to your wireless network via the
devices' MAC addresses. All other devices not listed as Permitted
will be Forbidden and vice versa.
1. Select the wireless network (SSID) you wish to enable Access
Control on.
2. MAC Address Filter: Select Permit or Forbid from the drop-down
list.
3. To permit a wireless device to connect to your wireless network,
select Permit, enter its MAC address, click Add and then OK. Then
only this device listed as "Permitted" will be able to connect to
your wireless network; all other wireless devices will forbidden.
Wireless N301 Easy Setup Router
.
49