l
Security Mode: WPA-PSK
l
Cipher Type: AES
l
Password: 12345678
l
AP MAC (BSSID): C8:3A:35:00:01:20 (can be found on the label attached to the device)
l
Make sure DHCP server is enabled on router 1.
Click Advanced -> DHCP Server to enter the DHCP server configuration screen. You can view
and configure the DHCP server settings here.
Set the LAN IP address of Router 1 to a different address yet on the same net segment as
Router 2.
For example, Router 1: 192.168.2.1, Router 2: 192.168.2.10.
About how to configure these IP addresses, see 1.6 LAN Setting.
46
III Features &Connectivity