DXS-3350SR Gigabit Layer 3 Switch
OSPF Virtual Interface Settings
Click the OSPF Virtual Interface Settings link to view the current OSPF Virtual Interface Settings. There are no virtual
interface settings configured by default, so the first time this table is viewed there will be no interfaces listed. To add a new
OSPF virtual interface configuration set to the table, click the Add button. A new menu appears (see below). To change an
existing configuration, click on the hyperlinked Transit Area ID for the set you want to change. The menu to modify an
existing set is the same as the menu used to add a new one. To eliminate an existing configuration, click the
in the
Delete column.
Figure 6- 96. OSPF Virtual Interface Settings window
The status of the virtual interface appears (Up or Down) in the Status column.
Figure 6- 97. Add/Modify OSPF Virtual Link Setting – Add window
162