Menu Bar - D-Link dxs-3350sr Installation & User Manual

This window holds the following information:
Parameter Description
Device Name
Module Name
MAC Address
Remote Port No.
Local Port No.
Port Speed
Click Close to close the Property window.

Menu Bar

The Single IP Management window contains a menu bar for device configurations, as seen below.
The five menus on the menu bar are as follows.
File
Print Setup - will view the image to be printed.
Print Topology - will print the topology map.
Preference - will set display properties, such as polling interval, and the views to open at SIM startup.
DXS-3350SR Gigabit Layer 3 Switch
Figure 10- 1 . Device Property window.
This field will display the Device Name of the Switches in the SIM group configured by
the user. If no Device Name is configured by the name, it will be given the name
default and tagged with the last six digits of the MAC Address to identify it.
Displays the full module name of the Switch that was right-clicked.
Displays the MAC Address of the corresponding Switch.
Displays the number of the physical port on the MS or CaS that the CS is connected
to. The CS will have no entry in this field.
Displays the number of the physical port on the CS that the MS or CaS is connected
to. The CS will have no entry in this field.
Displays the connection speed between the CS and the MS or CaS
Figure 10- 1 . Menu Bar of the Topology View 7
6
260