2.4
Device front
Here are definitions of terms frequently used in this manual:
Figure 2-1
2.5
Service button (SET)
On the front side of the SINAUT MD741-1 there is a small hole (see B) which is
SET marked and has a button behind it. Use a pointed object, e.g. a straightened-
out paperclip, to press this button.
If you press the button for longer than 5 seconds, the SINAUT MD741-1
●
reboots and loads the factory settings.
SINAUT MD741-1
C79000-G8976-C236-05
Operating elements
1)
Connection terminals for the
power supply
2)
Set button
3)
Antenna jack type SMA
4)
Operating state indicators S,
Q,
5)
X1 (Service; USB) – without
function
6)
10/100 Base-T - RJ45 jack for
connecting the local network
7)
Operating state indicators
Power, LAN, VPN
2 Setup
19