Siemens SINAUT MD741-1 System Manual page 42

3 Configuration
Loaded certificates are deleted.
●
Log files are deleted.
●
Reachability of the device
The device can once again be reached at the IP address 192.168.1.1 that was set
in the factory.
Note
Save configuration profiles externally first
If you do not want to discard the entire data you have entered, you can save this in
a configuration profile, store it externally and load it again after resetting to factory
settings. For information on this, refer to section 3.7.
As an alternative: Resetting to the default configuration
If you do not want to delete created configuration profiles, certificates and log files,
instead of resetting to factory settings, you also have the alternative of resetting the
device to the standard configuration. For information on this, refer to section 3.7.
42
SINAUT MD741-1
C79000-G8976-C236-05