Siemens SINAUT MD741-1 System Manual page 51

NTP server
Click on New to add an NTP server, and enter the IP address of such an NTP
server, or use the NTP server preset at the factory. You can specify multiple NTP
servers at the same time.
It is not possible to enter the NTP address as a hostname (e.g. timeserver.org).
Polling interval
The time synchronization is carried out cyclically. The interval at which
synchronization is performed is determined by the SINAUT MD741-1 automatically.
A new synchronization will be carried out at least once every 36 hours. The poll
interval defines the minimum period that the SINAUT MD741-1 waits until the next
synchronization.
Notice
Synchronization of the system time via NTP creates additional data traffic on the
EGPRS or GPRS interfaces. This may result in additional costs, depending on your
user agreement with the GSM network operator.
Serve system time to local network
The SINAUT MD741-1 can serve itself as an NTP time server for the applications
that are connected to its local network interface. To activate this function select
Yes.
The NTP time server in the SINAUT MD741-1 can be reached via the local IP
address set for the SINAUT MD741-1, see Chapter 4.1.
Factory settings
The factory settings for the SINAUT MD741-1 are as follows:
Local timezone
Activate NTP synchronization
NTP server
Polling interval
Serve system time to local network
SINAUT MD741-1
C79000-G8976-C236-05
4 Local interface
UTC
No
192.53.103.108
1.1 hours
No
51