Table of Contents
Advertisement
10 Additional functions
Factory settings
The factory settings of the SINAUT MD741-1 are as follows:
User name
Password
Port number
Firewall rules
From IP address
Action
Log
10.4
Software Update
The Update function can be used to load new operating software to the SINAUT
MD741-1 and activate this software.
In an immediate update the new software will be unzipped. This process can take
several minutes. After that the actual update process begins, which is indicated by
the LEDs lighting up in sequence.
The settings of the SINAUT MD741-1 will be accepted insofar as the settings still
have the same effect in the new software version as they did before the update.
Figure 10-4
126
Maintenance > Update
User
Password
26864
Not active
0.0.0.0
Accept
No
SINAUT MD741-1
C79000-G8976-C236-05
Advertisement
Table of Contents
