Detection Area; Installation - Optex HX-40 Installation Instructions Manual

4
DETECTION AREA SETTING
4-A

Detection Area

Side view of detection area
(Installation height 3.0 m (1 ft.) )
12 m (40 ft.)
(Installation height 2.5 m)
12 m (40 ft.)
• Accessory bracket is required when the HX
is installed at 2.5m (8.3 ft.) height.
• The vertical angle of HX needs to be
adjusted 1 click (2.5° upward) to keep the
12 m (40 ft.) detection range.
See the "Caution" of 6-B for the details.
4-B Detection Length Adjustment
To limit the detection distance, apply the appropriate masking seal. Note that there are three
different types of seal.
1
5

INSTALLATION

Open the wiring knockout with suitable
1
tool e.g. screwdriver.
9.0 m (30 ft.)
Top view of detection area
8 m
(26.7ft.)
0
8 m
(26.7ft.)
5.5 m (18.3 ft.)
1
2
Pass the wire through the base knockout.
2
In
Wiring sponge pad
-3-
12 m
(40 ft.)
4.0 m (13.3 ft.)
1
3
2
Out