Chapter 2 Installation; Physical Installation - Tenda teg2124t User Manual

300m wireless ap

Hide thumbs Also See for teg2124t:

Table of Contents

300M Wireless AP

Chapter 2 Installation

ip--------------------------------------------------------------------------------------------------------------------------------------

1. The PoE switch should be IEEE 802.3at compliant.

2. With a PoE device, it is advisable to connect to the PoE device for power supply; Without a PoE device,

please use the included power adapter for power supply.

-----------------------------------------------------------------------------------------------------------------------------------------------

Connect to a PoE Device

Step 1: Insert the Ethernet cable into the bracket (Recommended: Cat5, Cat5e or higher);

Step 2: Install the bracket onto the ceiling (Drill 4 holes on the ceiling, maneuver the bracket until it fits in

the holes on the ceiling and then fix the bracket onto the ceiling with the included screws.);

Step 3: Connect the Ethernet cable to the LAN port of the device;

Step 4: Fix the device onto the bracket;

Step 5: Connect the other end of the Ethernet cable to a PoE port on an IEEE 802.3at-compliant switch;

Table of Contents